EPM7032AETC44-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 227.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Number of Outputs | 36 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 227.3MHz |
| Architecture | PLA-TYPE |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032AETC44-7N Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with TQFP.The device has 36inputs and outputs.There are 44 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 3.3V is used as the power supply for this device.This part is part of the family [0].With 44pins programmed, the chip is ready to use.A digital circuit can be constructed using 600gates.High efficiency requires a voltage supply of [0].In order to store data, EEPROMis used.The electronic component is mounted by Surface Mount.There are 44 pins on the device.A maximum voltage of 3.6Vis required for operation.It operates with the minimal supply voltage of 3V.There are 36 programmable I/Os in this system.There can be 227.3MHz frequency achieved.The operating temperature should be higher than 0°C.Temperatures should not exceed 70°C.It is composed of 2 logic blocks (LABs).Maximum frequency should be less than 227.3MHz.A programmable logic type is classified as EE PLD.A 36output is configured for this device.
EPM7032AETC44-7N Features
TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
36 outputs
EPM7032AETC44-7N Applications
There are a lot of Altera EPM7032AETC44-7N CPLDs applications.
- I/O PORTS (MCU MODULE)
- Boolean function generators
- Battery operated portable devices
- Synchronous or asynchronous mode
- Protection relays
- Dedicated input registers
- Address decoders
- State machine design
- Power up sequencing
- Random logic replacement
