Parameters |
RoHS Status |
RoHS Compliant |
Mount |
Surface Mount |
Package / Case |
BGA |
Number of Pins |
49 |
Published |
2014 |
JESD-609 Code |
e1 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
49 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
YES |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
49 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
36 |
Memory Type |
EEPROM |
Propagation Delay |
3.5 ns |
Frequency (Max) |
227.3MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
600 |
Number of Programmable I/O |
41 |
Number of Logic Blocks (LABs) |
2 |
Output Function |
MACROCELL |
Number of Macro Cells |
32 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
1.55mm |
Length |
7mm |
Width |
7mm |
EPM7032BUC49-3N Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).BGAis the package in which it resides.It is programmed with 36 I/Os.It is programmed that device terminations will be 49 .This electrical part has a terminal position of BOTTOMand is connected to the ground.The device is powered by a voltage of 2.5V volts.There is a part in the family [0].A chip with 49pins is programmed.This device also displays [0].In digital circuits, there are 600gates, which act as a basic building block.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].It is mounted by Surface Mount.It is designed with 49 pins.It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A programmable I/O count of 41 has been recorded.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.The program consists of 2 logic blocks (LABs).Maximum frequency should be less than 227.3MHz.This kind of FPGA is composed of EE PLD.
EPM7032BUC49-3N Features
BGA package
36 I/Os
49 pin count
49 pins
2 logic blocks (LABs)
EPM7032BUC49-3N Applications
There are a lot of Altera EPM7032BUC49-3N CPLDs applications.
- Software-driven hardware configuration
- Boolean function generators
- Interface bridging
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- I/O expansion
- Pattern recognition
- Field programmable gate
- DDC INTERFACE
- Power Meter SMPS
- DMA control