EPM7032LC44-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.81mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7032LC44-15 Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the PLCCpackage, you will find it.This device has 36 I/O ports programmed into it.There is a 44terminations set on devices.Its terminal position is QUAD.Power is provided by a supply voltage of 5V volts.The part is included in Programmable Logic Devices.44pins are programmed on the chip.A digital circuit is built using 600gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.The device is designed with pins [0].It operates with the maximal supply voltage of 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.It operates from 5V power supplies.This can be achieved at a frequency of 100MHz.There should be a temperature above 0°Cat the time of operation.It is recommended to keep the operating temperature below 70°C.It is composed of 2 logic blocks (LABs).There are several types of programmable logic that can be categorized as EE PLD.
EPM7032LC44-15 Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032LC44-15 Applications
There are a lot of Altera EPM7032LC44-15 CPLDs applications.
- Dedicated input registers
- POWER-SAVING MODES
- Multiple DIP Switch Replacement
- Voltage level translation
- Parity generators
- INTERRUPT SYSTEM
- Reset swapping
- Handheld digital devices
- Boolean function generators
- ROM patching
