EPM7032QC44-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 36 |
| Clock Frequency | 166.7MHz |
| Propagation Delay | 7.5 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
EPM7032QC44-7 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the QFPpackage, you will find it.In this case, there are 36 I/Os programmed.There is a 44terminations set on devices.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.This part is part of the family [0].It is programmed with 44 pins.In digital circuits, there are 600gates, which act as a basic building block.The electronic part is mounted by Surface Mount.It is designed with 44 pins.A total of 5V power supplies are needed to run it.It is recommended that the operating temperature be greater than 0°C.A temperature less than 70°Cshould be used for operation.Its basic building block is composed of 2 logic blocks (LABs).It is recommended that the supply voltage (Vsup) be greater than 4.75V.Ideally, its clock frequency should not exceed 166.7MHz.A programmable logic type is classified as EE PLD.
EPM7032QC44-7 Features
QFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032QC44-7 Applications
There are a lot of Altera EPM7032QC44-7 CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Programmable polarity
- D/T registers and latches
- Power automation
- DMA control
- Protection relays
- White goods (Washing, Cold, Aircon ,...)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Parity generators
- Storage Cards and Storage Racks
