EPM7032SLC44-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032SLC44-7N Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As you can see, this device has 36 I/O ports programmed into it.The device is programmed with 44 terminations.Its terminal position is QUAD.The power supply voltage is 5V.There is a part in the family [0].44pins are programmed on the chip.If you use this device, you will also find [0].A digital circuit can be constructed using 600gates.The supply voltage should be maintained at 5V for high efficiency.For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.There are 44 pins embedded in the device.It operates at a maximum supply voltage of 5.25V volts.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There is 5V power supply available for it.In this case, 166.7MHzis the frequency that can be achieved.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 2logic blocks (LABs) that make up its basic building block.There is a type of programmable logic called EE PLD.
EPM7032SLC44-7N Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032SLC44-7N Applications
There are a lot of Altera EPM7032SLC44-7N CPLDs applications.
- Page register
- State machine control
- Digital multiplexers
- Preset swapping
- USB Bus
- Programmable polarity
- Code converters
- Reset swapping
- I/O expansion
- Complex programmable logic devices
