EPM7032STC44-10F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM7032STC44-10F Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].There are 36 I/Os programmed in it.It is programmed that device terminations will be 44 .The terminal position of this electrical component is QUAD.There is 5V voltage supply for this device.This part is part of the family [0].As a result, it is packaged as Bulk.The chip is programmed with 44 pins.If this device is used, you will also be able to find [0].In digital circuits, 600gates serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 44 pins on the device.A maximum supply voltage of 5.25Vis used in its operation.It operates with the minimal supply voltage of 4.75V.It runs on 5Vvolts of power.There is a maximum frequency of 125MHz.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.There are 2 logic blocks (LABs) in its basic building block.Types of programmable logic are divided into EE PLD.
EPM7032STC44-10F Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032STC44-10F Applications
There are a lot of Altera EPM7032STC44-10F CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Pattern recognition
- D/T registers and latches
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Bootloaders for FPGAs
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Protection relays
- Software Configuration of Add-In Boards
- Boolean function generators
