EPM7032STC44-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032STC44-10N Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a TQFP package.In this case, there are 36 I/Os programmed.There is a 44terminations set on devices.There is a QUADterminal position on the electrical part in question.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].Chips are programmed with 44 pins.This device is also capable of displaying [0].In digital circuits, there are 600gates, which act as a basic building block.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.The pins are [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.The minimal supply voltage is 4.75V.A total of 5V power supplies are needed to run it.The frequency that can be achieved is 125MHz.It is recommended that the operating temperature be higher than 0°C.Temperatures should be lower than 70°C when operating.The system consists of 2 logic blocks (LABs).A programmable logic type can be categorized as EE PLD.
EPM7032STC44-10N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032STC44-10N Applications
There are a lot of Altera EPM7032STC44-10N CPLDs applications.
- Preset swapping
- Address decoding
- INTERRUPT SYSTEM
- I2C BUS INTERFACE
- Custom state machines
- Bootloaders for FPGAs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Software-driven hardware configuration
- PLC analog input modules
- Synchronous or asynchronous mode
