EPM7032STI44-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032STI44-7N Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).In the TQFPpackage, you will find it.The device has 36inputs and outputs.44terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5V is used as the power supply for this device.It is included in Programmable Logic Devices.There are 44pins on the chip.As a building block for digital circuits, there are 600gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.This board has 44 pins.A maximum voltage of 5.5Vis required for operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.A power supply of 5Vvolts is required to operate this device.In this case, 166.7MHzis the frequency that can be achieved.There should be a temperature above -40°Cat the time of operation.It is recommended that the operating temperature be below 85°C.The logic block consists of 2 l logic blocks (LABs).A programmable logic type is classified as EE PLD.
EPM7032STI44-7N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)
EPM7032STI44-7N Applications
There are a lot of Altera EPM7032STI44-7N CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Software-Driven Hardware Configuration
- Complex programmable logic devices
- LED Lighting systems
- Digital designs
- Programmable polarity
- Protection relays
- Digital systems
- DDC INTERFACE
- STANDARD SERIAL INTERFACE UART
