EPM7064AEFC100-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 222.2MHz |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7064AEFC100-4 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 100-LBGA package containing it.This device has 68 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.It is powered from a supply voltage of 3.3V.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.FPGAs belonging to the MAX? 7000Aseries contain this type of chip.According to the EPM7064, its related parts can be found.1250gates are devices that serve as building blocks for digital circuits.A total of 4logic elements/blocks are present.A power supply of 2.5/3.33.3Vvolts is required to operate this device.3.6Vis the maximum supply voltage (Vsup).There should be a higher supply voltage (Vsup) than 3V.Its clock frequency should not exceed 222.2MHz.
EPM7064AEFC100-4 Features
100-LBGA package
68 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7064AEFC100-4 Applications
There are a lot of Intel EPM7064AEFC100-4 CPLDs applications.
- Wide Vin Industrial low power SMPS
- Complex programmable logic devices
- Cross-Matrix Switch
- Digital multiplexers
- Auxiliary Power Supply Isolated and Non-isolated
- Field programmable gate
- State machine design
- Dedicated input registers
- STANDARD SERIAL INTERFACE UART
- Address decoders
