EPM7064AELC44-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064AELC44-4 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the PLCC package.In this case, there are 36 I/Os programmed.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.An electrical supply voltage of 3.3V is used to power it.This part is part of the family [0].It is recommended that the chip be packaged by Bulk.It has 44pins programmed.For digital circuits, there are 1250gates. These devices serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.This board has 44 pins.There is a maximum supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.A total of 36 Programmable I/Os are available.You can achieve 250MHzfrequencies.It is recommended that the operating temperature be greater than 0°C.It is recommended to keep the operating temperature below 70°C.In total, it contains 4 logic blocks (LABs).It should be below 222.2MHzat the maximal frequency.This kind of FPGA is composed of EE PLD.
EPM7064AELC44-4 Features
PLCC package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064AELC44-4 Applications
There are a lot of Altera EPM7064AELC44-4 CPLDs applications.
- Address decoding
- Multiple DIP Switch Replacement
- Timing control
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- White goods (Washing, Cold, Aircon ,...)
- Protection relays
- PLC analog input modules
- I/O PORTS (MCU MODULE)
- Dedicated input registers
