Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
FBGA |
Number of Pins |
100 |
Published |
2014 |
Max Operating Temperature |
130°C |
Min Operating Temperature |
-40°C |
Operating Supply Voltage |
3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
68 |
Memory Type |
EEPROM |
Frequency (Max) |
222.2MHz |
Number of Logic Elements/Cells |
4 |
Number of Gates |
1250 |
Number of Programmable I/O |
68 |
Number of Logic Blocks (LABs) |
4 |
Number of Macro Cells |
64 |
RoHS Status |
RoHS Compliant |
EPM7064AETA100-10N Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).FBGAis the package in which it resides.As you can see, this device has 68 I/O ports programmed into it.In digital circuits, there are 1250gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].It is mounted by Surface Mount.This board has 100 pins.It operates at a maximum supply voltage of 3.6V volts.It is powered by 3Vas its minimum supply voltage.Currently, there are 68 Programmable I/Os available.In order to operate properly, the operating temperature should be higher than -40°C.Ideally, the operating temperature should be below 130°C.The program consists of 4 logic blocks (LABs).A fundamental building block of logic consists of 4logic elements/cells.The maximum frequency should not exceed 222.2MHz.
EPM7064AETA100-10N Features
FBGA package
68 I/Os
100 pins
4 logic blocks (LABs)
EPM7064AETA100-10N Applications
There are a lot of Altera EPM7064AETA100-10N CPLDs applications.
- Power up sequencing
- I/O PORTS (MCU MODULE)
- Digital systems
- Voltage level translation
- Software-driven hardware configuration
- Bootloaders for FPGAs
- White goods (Washing, Cold, Aircon ,...)
- DDC INTERFACE
- Address decoders
- High speed graphics processing