EPM7064AETC44-10
| Parameters | |
|---|---|
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
EPM7064AETC44-10 Overview
In the mobile phone network, there are 64macro cells, which are cells with high-power antennas and towers.It is part of the TQFP package.It is programmed with 36 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3Vprovides power to the device.It is a part of the family [0].It is packaged in the way of Bulk.It has 44pins programmed.The 1250gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.It is mounted by Surface Mount.There are 44 pins embedded in the device.It operates with the maximal supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.A programmable I/O count of 36 has been recorded.This frequency can be achieved at 125MHz.In order to operate, the temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.There are 4logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be lower than 222.2MHz.Programmable logic types can be divided into EE PLD.
EPM7064AETC44-10 Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064AETC44-10 Applications
There are a lot of Altera EPM7064AETC44-10 CPLDs applications.
- Software-Driven Hardware Configuration
- White goods (Washing, Cold, Aircon ,...)
- Custom shift registers
- DMA control
- POWER-SAVING MODES
- Cross-Matrix Switch
- TIMERS/COUNTERS
- Custom state machines
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Protection relays
