EPM7064AETC44-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Number of Outputs | 36 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Architecture | PLA-TYPE |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064AETC44-4 Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.It is equipped with 36I/O ports.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.The power source is powered by 3.3Vvolts.This part is part of the family [0].Bulkshould be used for packaging the chip.The chip is programmed with 44 pins.There are 1250 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.There are 44 pins on the device.It operates with the maximal supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are a total of 36 Programmable I/Os.There is a maximum frequency of 250MHz.In order to operate properly, the operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 70°C.The program consists of 4 logic blocks (LABs).Maximum frequency should be less than 222.2MHz.Programmable logic types can be divided into EE PLD.This device is configured to output [0].
EPM7064AETC44-4 Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
36 outputs
EPM7064AETC44-4 Applications
There are a lot of Altera EPM7064AETC44-4 CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Custom state machines
- Power automation
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple DIP Switch Replacement
- Wide Vin Industrial low power SMPS
- White goods (Washing, Cold, Aircon ,...)
- Address decoders
- Random logic replacement
- Parity generators
