EPM7064AETI100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PQFP-G100 |
| Number of Outputs | 68 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 135.1MHz |
| Propagation Delay | 7.5 ns |
| Architecture | PLA-TYPE |
| Number of Inputs | 68 |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | Non-RoHS Compliant |
EPM7064AETI100-7 Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].In this case, there are 68 I/Os programmed.100terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 3.3V.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the MAX? 7000A series.You can find its related parts in the [0].1250gates are devices that serve as building blocks for digital circuits.A total of 4logic elements/blocks are present.This device runs on 2.5/3.33.3Vvolts of electricity.In order to ensure proper operation, a maximum supply voltage (Vsup) of 3.6V is required.It is recommended that the supply voltage (Vsup) be greater than 3V.A frequency of 135.1MHzshould not be exceeded by its clock.The output is configured with the value [0].68inputs are used by the device.
EPM7064AETI100-7 Features
100-TQFP package
68 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
68 outputs
EPM7064AETI100-7 Applications
There are a lot of Intel EPM7064AETI100-7 CPLDs applications.
- Digital designs
- Protection relays
- Random logic replacement
- Page register
- I/O PORTS (MCU MODULE)
- Interface bridging
- ToR/Aggregation/Core Switch and Router
- Voltage level translation
- DDC INTERFACE
- Custom state machines
