EPM7064BFC100-3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 333.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 3.5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064BFC100-3 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the FBGA package.As you can see, this device has 68 I/O ports programmed into it.The device is programmed with 100 terminations.BOTTOMis the terminal position of this electrical part.The power source is powered by 2.5Vvolts.It is a part of the family [0].The chip should be packaged by Bulk.There are 100pins on the chip.When using this device, YEScan also be found.In digital circuits, there are 1250gates, which act as a basic building block.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.The device is designed with pins [0].It operates with the maximal supply voltage of 2.625V.The minimal supply voltage is 2.375V.Currently, there are 68 Programmable I/Os available.It is possible to achieve a frequency of 333.33MHz.Ideally, the operating temperature should be greater than 0°C.A temperature less than 70°Cshould be used for operation.Its basic building block is composed of 4 logic blocks (LABs).The maximal frequency should be lower than 303MHz.It is possible to classify programmable logic as EE PLD.
EPM7064BFC100-3 Features
FBGA package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM7064BFC100-3 Applications
There are a lot of Altera EPM7064BFC100-3 CPLDs applications.
- Wide Vin Industrial low power SMPS
- DDC INTERFACE
- Preset swapping
- Reset swapping
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Multiple DIP Switch Replacement
- Interface bridging
- I/O PORTS (MCU MODULE)
- Multiple Clock Source Selection
