EPM7064BTC100-5
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064BTC100-5 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As a result, it has 68 I/O ports programmed.There is a 100terminations set on devices.The terminal position of this electrical component is QUAD.The power supply voltage is 2.5V.There is a part in the family [0].Bulkshould be used for packaging the chip.A chip with 100pins is programmed.This device is also capable of displaying [0].In digital circuits, there are 1250gates, which act as a basic building block.Data is stored using [0].Surface Mountmounts this electronic component.100pins are included in its design.There is a maximum supply voltage of 3.6Vwhen the device is operating.In order for it to operate, a supply voltage of 3Vis required.This device runs on 1.8/3.32.5Vvolts of electricity.There are 68 programmable I/Os in this system.There can be 250MHz frequency achieved.Ideally, the operating temperature should be greater than 0°C.A temperature below 70°Cshould be used as the operating temperature.Its basic building block is composed of 4 logic blocks (LABs).It should be below 303MHzat the maximal frequency.Programmable logic types can be divided into EE PLD.
EPM7064BTC100-5 Features
TQFP package
68 I/Os
100 pin count
100 pins
1.8/3.32.5V power supplies
4 logic blocks (LABs)
EPM7064BTC100-5 Applications
There are a lot of Altera EPM7064BTC100-5 CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Software-Driven Hardware Configuration
- Software-driven hardware configuration
- Pattern recognition
- Address decoders
- Boolean function generators
- D/T registers and latches
- Multiple Clock Source Selection
- Auxiliary Power Supply Isolated and Non-isolated
- I/O expansion
