EPM7064BTC100-5N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064BTC100-5N Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a TQFP package.As a result, it has 68 I/O ports programmed.Devices are programmed with terminations of [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].It is programmed with 100 pins.When using this device, YEScan also be found.A digital circuit is built using 1250gates.For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.This board has 100 pins.There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for this device to operate.Currently, there are 68 Programmable I/Os available.There is 250MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.4logic blocks (LABs) make up this circuit.The maximal frequency should be lower than 303MHz.A programmable logic type is classified as EE PLD.
EPM7064BTC100-5N Features
TQFP package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM7064BTC100-5N Applications
There are a lot of Altera EPM7064BTC100-5N CPLDs applications.
- Portable digital devices
- Reset swapping
- Random logic replacement
- Interface bridging
- PLC analog input modules
- Storage Cards and Storage Racks
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Dedicated input registers
- PULSE WIDTH MODULATION (PWM)
- Timing control
