EPM7064BTC100-5N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.8/3.32.5V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 303MHz |
| Propagation Delay | 3.5 ns |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.375V~2.625V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
EPM7064BTC100-5N Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 100-TQFP package.As a result, it has 68 I/O ports programmed.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power supply voltage is 2.5V.It is a part of the family [0].Trayshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.This type of FPGA is a part of the MAX? 7000B series.This device can also display [0].The EPM7064can be used to identify its related parts.The 1250gates serve as building blocks for digital circuits.There are 4 logic elements or blocks present.A power supply of 1.8/3.32.5Vis required to operate it.2.625Vrepresents the maximal supply voltage (Vsup).Vsup (supply voltage) must be greater than 2.375V.It is recommended that the clock frequency not exceed 303MHz.
EPM7064BTC100-5N Features
100-TQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies
EPM7064BTC100-5N Applications
There are a lot of Intel EPM7064BTC100-5N CPLDs applications.
- PLC analog input modules
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple DIP Switch Replacement
- Programmable power management
- Reset swapping
- Voltage level translation
- Complex programmable logic devices
- High speed graphics processing
- Boolean function generators
- Programmable polarity
