EPM7064BTC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| RoHS Status | RoHS Compliant |
EPM7064BTC100-7 Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the TQFPpackage, you will find it.There are 68 I/Os on the board.There is a 100terminations set on devices.The terminal position of this electrical component is QUAD.An electrical supply voltage of 2.5V is used to power it.The part is included in Programmable Logic Devices.The chip is programmed with 100 pins.This device can also display [0].In digital circuits, there are 1250gates, which act as a basic building block.For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The 100pins are designed into the board.A voltage of 3.6V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 3V.This device runs on 1.8/3.32.5Vvolts of electricity.There are 68 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There is a maximum frequency of 166.67MHz.Ideally, the operating temperature should be greater than 0°C.There should be a temperature below 70°Cat the time of operation.The logic block consists of 4 l logic blocks (LABs).The maximum frequency should not exceed 303MHz.It is possible to classify programmable logic as EE PLD.
EPM7064BTC100-7 Features
TQFP package
68 I/Os
100 pin count
100 pins
1.8/3.32.5V power supplies
4 logic blocks (LABs)
EPM7064BTC100-7 Applications
There are a lot of Altera EPM7064BTC100-7 CPLDs applications.
- Page register
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Custom state machines
- Battery operated portable devices
- Software Configuration of Add-In Boards
- Discrete logic functions
- POWER-SAVING MODES
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
- Complex programmable logic devices
