EPM7064BTC44-3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 333.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 3.5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064BTC44-3 Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.TQFPis the package in which it resides.As you can see, this device has 36 I/O ports programmed into it.There are 44 terminations programmed into the device.The terminal position of this electrical component is QUAD.The power supply voltage is 2.5V.The part is included in Programmable Logic Devices.It has 44pins programmed.It is also characterized by YES.The 1250gates serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].For data storage, EEPROMis adopted.In this case, Surface Mountis used to mount the electronic component.It is designed with 44 pins.A maximum voltage of 2.625Vis required for operation.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.Programmable I/Os are counted up 36.There can be 333.33MHz frequency achieved.The operating temperature should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.The program consists of 4 logic blocks (LABs).A maximum frequency of less than 303MHzis recommended.There are several types of programmable logic that can be categorized as EE PLD.
EPM7064BTC44-3 Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064BTC44-3 Applications
There are a lot of Altera EPM7064BTC44-3 CPLDs applications.
- Interface bridging
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- Random logic replacement
- Complex programmable logic devices
- PULSE WIDTH MODULATION (PWM)
- Parity generators
- Software-driven hardware configuration
- Page register
- Reset swapping
