EPM7064BTC44-3N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 333.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Turn On Delay Time | 3.5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7064BTC44-3N Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).There is a TQFP package containing it.The device is programmed with 36 I/Os.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 2.5Vprovides power to the device.It is a part of family [0].44pins are programmed on the chip.If you use this device, you will also find [0].The 1250gates serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.There are 44 pins on the device.There is a maximum supply voltage of 2.625Vwhen the device is operating.It operates with the minimal supply voltage of 2.375V.There are 36 Programmable I/Os.In this case, 333.33MHzis the frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be below 70°C.It consists of 4 logic blocks (LABs).It is recommended that the maximal frequency be lower than 303MHz.A programmable logic type can be categorized as EE PLD.
EPM7064BTC44-3N Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064BTC44-3N Applications
There are a lot of Altera EPM7064BTC44-3N CPLDs applications.
- DMA control
- Portable digital devices
- I/O expansion
- Pattern recognition
- Page register
- USB Bus
- Power Meter SMPS
- Multiple Clock Source Selection
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ROM patching
