EPM7064BTC44-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 303MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
EPM7064BTC44-7 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is contained in package [0].There are 36 I/Os on the board.44terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The power supply voltage is 2.5V.There is a part included in Programmable Logic Devices.There are 44pins on the chip.It is also characterized by YES.For digital circuits, there are 1250gates. These devices serve as building blocks.For data storage, EEPROMis adopted.It is mounted by Surface Mount.This board has 44 pins.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There is 1.8/3.32.5V power supply available for it.There are a total of 36 Programmable I/Os.In this case, 166.67MHzis the frequency that can be achieved.It is recommended that the operating temperature exceeds 0°C.It is recommended that the operating temperature be below 70°C.In total, it contains 4 logic blocks (LABs).A maximum frequency of less than 303MHzis recommended.This kind of FPGA is composed of EE PLD.
EPM7064BTC44-7 Features
TQFP package
36 I/Os
44 pin count
44 pins
1.8/3.32.5V power supplies
4 logic blocks (LABs)
EPM7064BTC44-7 Applications
There are a lot of Altera EPM7064BTC44-7 CPLDs applications.
- Digital systems
- INTERRUPT SYSTEM
- ROM patching
- Protection relays
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- POWER-SAVING MODES
- Storage Cards and Storage Racks
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Multiple Clock Source Selection
- Software-driven hardware configuration
