EPM7064LC44-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.81mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064LC44-10 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].As you can see, this device has 36 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of QUAD.Power is provided by a supply voltage of 5V volts.There is a part included in Programmable Logic Devices.It is programmed with 44 pins.As a building block for digital circuits, there are 1250gates.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.This device is mounted by Surface Mount.44pins are included in its design.It operates with the maximal supply voltage of 5.25V.It is powered by 4.75Vas its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.Currently, there are 36 Programmable I/Os available.You can achieve 125MHzfrequencies.The operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.There are 4logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency be less than 151.5MHz.Programmable logic types are divided into EE PLD.
EPM7064LC44-10 Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064LC44-10 Applications
There are a lot of Altera EPM7064LC44-10 CPLDs applications.
- D/T registers and latches
- Digital systems
- INTERRUPT SYSTEM
- Handheld digital devices
- State machine design
- Reset swapping
- DMA control
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- Preset swapping
