EPM7064LC68-15
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 52 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 52 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height | 3.81mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064LC68-15 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 52 I/Os programmed.The termination of a device is set to [0].QUADis the terminal position of this electrical part.There is 5V voltage supply for this device.It belongs to the family [0].It is equipped with 68 pin count.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.In digital circuits, there are 1250gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.68pins are included in its design.This device operates at a voltage of 5.25Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 52.It is possible to achieve a frequency of 100MHz.The operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.Its basic building block is composed of 4 logic blocks (LABs).The maximum frequency should not exceed 151.5MHz.Programmable logic types can be divided into EE PLD.
EPM7064LC68-15 Features
PLCC package
52 I/Os
68 pin count
68 pins
4 logic blocks (LABs)
EPM7064LC68-15 Applications
There are a lot of Altera EPM7064LC68-15 CPLDs applications.
- Configurable Addressing of I/O Boards
- Custom shift registers
- Wide Vin Industrial low power SMPS
- I/O expansion
- Interface bridging
- Digital multiplexers
- Power automation
- Portable digital devices
- Address decoding
- Digital designs
