EPM7064QC100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7064QC100-10 Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A PQFP package contains the item.In this case, there are 68 I/Os programmed.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 5V.This part is included in Programmable Logic Devices.There are 100pins on the chip.This device can also display [0].The 1250gates serve as building blocks for digital circuits.It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.100pins are included in its design.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 3V.It runs on 3.3/55Vvolts of power.There are a total of 68 Programmable I/Os.There can be 125MHz frequency achieved.It is recommended that the operating temperature exceed 0°C.It is recommended to keep the operating temperature below 70°C.4logic blocks (LABs) make up this circuit.Maximum frequency should be less than 151.5MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7064QC100-10 Features
PQFP package
68 I/Os
100 pin count
100 pins
3.3/55V power supplies
4 logic blocks (LABs)
EPM7064QC100-10 Applications
There are a lot of Altera EPM7064QC100-10 CPLDs applications.
- Digital multiplexers
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- Programmable power management
- Bootloaders for FPGAs
- Field programmable gate
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- DMA control
