Parameters |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
84 |
Published |
1998 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
200MHz |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
68 |
Memory Type |
EEPROM |
Propagation Delay |
6 ns |
Frequency (Max) |
175.4MHz |
Number of Logic Elements/Cells |
4 |
Number of Gates |
1250 |
Number of Programmable I/O |
68 |
Number of Logic Blocks (LABs) |
4 |
Number of Macro Cells |
64 |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
EPM7064SLC84-6 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 68 I/Os programmed in it.The 1250gates serve as building blocks for digital circuits.In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.The device has a pinout of [0].A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for it to operate.There are 68 Programmable I/Os.There can be 200MHz frequency achieved.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.Its basic building block is composed of 4 logic blocks (LABs).The fundamental building block consists of 4logic elements/cells.It is recommended that the maximum frequency be less than 175.4MHz.
EPM7064SLC84-6 Features
PLCC package
68 I/Os
84 pins
4 logic blocks (LABs)
EPM7064SLC84-6 Applications
There are a lot of Altera EPM7064SLC84-6 CPLDs applications.
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- USB Bus
- State machine control
- State machine design
- High speed graphics processing
- Reset swapping
- Page register
- D/T registers and latches
- DMA control