EPM7064SLI44-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 175.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064SLI44-7N Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the PLCC package.The device is programmed with 36 I/O ports.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.Power is provided by a supply voltage of 5V volts.This part is part of the family [0].A chip with 44pins is programmed.1250gates are devices that serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.This device is mounted by Surface Mount.It is designed with 44 pins.A maximum voltage of 5.5Vis required for operation.A minimum supply voltage of 4.5V is required for this device to operate.This device runs on 5Vvolts of electricity.There are 36 Programmable I/Os.There is 175.4MHz frequency that can be achieved.It is recommended that the operating temperature be greater than -40°C.A temperature below 85°Cshould be used as the operating temperature.The logic block consists of 4 l logic blocks (LABs).It is recommended that the maximum frequency be less than 175.4MHz.Types of programmable logic are divided into EE PLD.
EPM7064SLI44-7N Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064SLI44-7N Applications
There are a lot of Altera EPM7064SLI44-7N CPLDs applications.
- Protection relays
- DDC INTERFACE
- Cross-Matrix Switch
- Custom shift registers
- PULSE WIDTH MODULATION (PWM)
- Interface bridging
- Bootloaders for FPGAs
- Synchronous or asynchronous mode
- White goods (Washing, Cold, Aircon ,...)
- Address decoding
