EPM7064STC100-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC100-10 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a TQFP package.There are 68 I/Os on the board.100terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 5V.This part is in the family [0].Package the chip by Bulk.A chip with 100pins is programmed.In digital circuits, 1250gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins embedded in the device.This device operates at a voltage of 5.25Vas its maximum supply voltage.It is powered by 4.75Vas its minimum supply voltage.Currently, there are 68 Programmable I/Os available.This can be achieved at a frequency of 125MHz.It is recommended that the operating temperature be higher than 0°C.A temperature lower than 70°Cis recommended for operation.There are 4 logic blocks (LABs) in its basic building block.If the maximal frequency is less than [0], it should be lower than that.Programmable logic types are divided into EE PLD.
EPM7064STC100-10 Features
TQFP package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM7064STC100-10 Applications
There are a lot of Altera EPM7064STC100-10 CPLDs applications.
- Voltage level translation
- Complex programmable logic devices
- D/T registers and latches
- POWER-SAVING MODES
- Custom state machines
- PLC analog input modules
- Multiple DIP Switch Replacement
- Digital systems
- Code converters
- Programmable power management
