EPM7064STC100-10F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC100-10F Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a TQFP package containing it.There are 68 I/Os on the board.The device is programmed with 100 terminations.This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 5V volts.This part is in the family [0].The chip should be packaged by Bulk.There are 100 pins on the chip.The 1250gates serve as building blocks for digital circuits.It is recommended to store data in [0].It is mounted by Surface Mount.This board has 100 pins.A maximum supply voltage of 3.6Vis used in its operation.The device is designed to operate with a minimal supply voltage of 3VV.This device runs on 3.3/55Vvolts of electricity.A total of 68programmable I/Os are available.The frequency that can be achieved is 125MHz.It is recommended that the operating temperature be higher than 0°C.Temperatures should be lower than 70°C when operating.It is composed of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.It is possible to classify programmable logic as EE PLD.
EPM7064STC100-10F Features
TQFP package
68 I/Os
100 pin count
100 pins
3.3/55V power supplies
4 logic blocks (LABs)
EPM7064STC100-10F Applications
There are a lot of Altera EPM7064STC100-10F CPLDs applications.
- D/T registers and latches
- Digital multiplexers
- Address decoders
- Handheld digital devices
- Power automation
- Custom shift registers
- Multiple Clock Source Selection
- Storage Cards and Storage Racks
- Dedicated input registers
- Protection relays
