EPM7064STC100-10FN
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
EPM7064STC100-10FN Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).TQFPis the package in which it resides.There are 68 I/Os on the board.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.A voltage of 5V is used as the power supply for this device.100pins are programmed on the chip.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.It is adopted to store data in [0].This device is mounted by Surface Mount.There are 100pins on it.A maximum supply voltage of 3.6Vis used in its operation.The device is designed to operate with a minimal supply voltage of 3VV.There are 68 Programmable I/Os.A frequency of 125MHzcan be achieved.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.In total, it contains 4 logic blocks (LABs).There should be a lower maximum frequency than 175.4MHz.Programmable logic types can be divided into EE PLD.
EPM7064STC100-10FN Features
TQFP package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM7064STC100-10FN Applications
There are a lot of Altera EPM7064STC100-10FN CPLDs applications.
- Digital designs
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Preset swapping
- High speed graphics processing
- ROM patching
- Software-driven hardware configuration
- STANDARD SERIAL INTERFACE UART
- Protection relays
- Field programmable gate
- Software Configuration of Add-In Boards
