EPM7064STC100-5N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
EPM7064STC100-5N Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).100-TQFPis the package in which it resides.There are 68 I/Os on the board.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 5V volts.There is a part in the family [0].The chip should be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Mount the chip by Surface Mount.In FPGA terms, it is a type of MAX? 7000Sseries FPGA.The EPM7064indicates that related parts can be found.1250gates are used to construct digital circuits.This logic element/block contains 4logic elements.A total of 3.3/55V power supplies are needed to run it.Supply voltage (Vsup) reaches a maximum of 5.25V.The clock frequency of the device should not exceed 250MHz.
EPM7064STC100-5N Features
100-TQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7064STC100-5N Applications
There are a lot of Intel EPM7064STC100-5N CPLDs applications.
- Power up sequencing
- LED Lighting systems
- Timing control
- Power automation
- Complex programmable logic devices
- STANDARD SERIAL INTERFACE UART
- Programmable polarity
- White goods (Washing, Cold, Aircon ,...)
- Custom shift registers
- Handheld digital devices
