EPM7064STC100-6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC100-6 Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with TQFP.The device is programmed with 68 I/Os.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5V is used as the power supply for this device.It is a part of family [0].The chip is programmed with 100 pins.A digital circuit can be constructed using 1250gates.In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 3Vis required.This device runs on 3.3/55Vvolts of electricity.There are a total of 68 Programmable I/Os.This can be achieved at a frequency of 200MHz.The operating temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.There are 4logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency be less than 175.4MHz.It is possible to classify programmable logic as EE PLD.
EPM7064STC100-6 Features
TQFP package
68 I/Os
100 pin count
100 pins
3.3/55V power supplies
4 logic blocks (LABs)
EPM7064STC100-6 Applications
There are a lot of Altera EPM7064STC100-6 CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Auxiliary Power Supply Isolated and Non-isolated
- PLC analog input modules
- Programmable power management
- POWER-SAVING MODES
- Digital designs
- Complex programmable logic devices
- DMA control
- Battery operated portable devices
- D/T registers and latches
