EPM7064STC100-6
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6 ns |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 6ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | Non-RoHS Compliant |
EPM7064STC100-6 Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].There are 68 I/Os programmed in it.The device is programmed with 100 terminations.This electrical component has a terminal position of 0.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the MAX? 7000S series.Its related parts can be found in the [0].In digital circuits, there are 1250gates, which act as a basic building block.This logic block consists of 4logic elements.A total of 3.3/55V power supplies are needed to run it.There is a maximum supply voltage (Vsup) of 5.25V.clock frequency should not exceed [0].
EPM7064STC100-6 Features
100-TQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7064STC100-6 Applications
There are a lot of Intel EPM7064STC100-6 CPLDs applications.
- Multiple DIP Switch Replacement
- State machine design
- Timing control
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Programmable power management
- Handheld digital devices
- Boolean function generators
- Storage Cards and Storage Racks
- LED Lighting systems
- Custom shift registers
