EPM7064STC44-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC44-10 Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is packaged with TQFP.The device has 36inputs and outputs.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.A voltage of 5V is used as the power supply for this device.This part is part of the family [0].Ideally, the chip should be packaged by Bulk.There are 44pins on the chip.When using this device, YESis also available.1250gates are used to construct digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].Surface Mountis used to mount this electronic component.There are 44 pins embedded in the device.There is a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for it to operate.It runs on 5Vvolts of power.There are 36 Programmable I/Os.This frequency is 125MHz.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 70°C.It is composed of 4 logic blocks (LABs).Maximum frequency should be less than 175.4MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7064STC44-10 Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-10 Applications
There are a lot of Altera EPM7064STC44-10 CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Dedicated input registers
- Multiple DIP Switch Replacement
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Reset swapping
- Code converters
- Digital systems
- I/O PORTS (MCU MODULE)
- ROM patching
- Discrete logic functions
