EPM7064STC44-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC44-5 Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the TQFP package.The device has 36inputs and outputs.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.The power supply voltage is 5V.It is a part of family [0].It is equipped with 44 pin count.It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.The supply voltage should be maintained at 5V for high efficiency.For data storage, EEPROMis adopted.Surface Mountis used to mount this electronic component.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.It runs on 5Vvolts of power.There are 36 programmable I/Os in this system.This frequency is 250MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.The logic block consists of 4 l logic blocks (LABs).The maximum frequency should not exceed 175.4MHz.Programmable logic types can be divided into EE PLD.
EPM7064STC44-5 Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-5 Applications
There are a lot of Altera EPM7064STC44-5 CPLDs applications.
- Storage Cards and Storage Racks
- Auxiliary Power Supply Isolated and Non-isolated
- Digital multiplexers
- ROM patching
- Complex programmable logic devices
- I/O expansion
- Digital designs
- TIMERS/COUNTERS
- Reset swapping
- White goods (Washing, Cold, Aircon ,...)
