EPM7064STC44-5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 175.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7064STC44-5N Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the TQFP package.The device is programmed with 36 I/O ports.44terminations are programmed into the device.Its terminal position is QUAD.It is powered from a supply voltage of 5V.This part is included in Programmable Logic Devices.Chips are programmed with 44 pins.In digital circuits, there are 1250gates, which act as a basic building block.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.A total of 44pins are provided on this board.There is a maximum supply voltage of 5.25Vwhen the device is operating.A minimum supply voltage of 4.75V is required for it to operate.In order for the device to operate, it requires 5V power supplies.There are 36 programmable I/Os in this system.In this case, 175.4MHzis the frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.4logic blocks (LABs) make up this circuit.A maximum frequency of less than 175.4MHzis recommended.There are several types of programmable logic that can be categorized as EE PLD.
EPM7064STC44-5N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-5N Applications
There are a lot of Altera EPM7064STC44-5N CPLDs applications.
- Preset swapping
- Protection relays
- White goods (Washing, Cold, Aircon ,...)
- Power automation
- State machine design
- I/O expansion
- Reset swapping
- LED Lighting systems
- Software-Driven Hardware Configuration
- POWER-SAVING MODES
