EPM7064STC44-6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC44-6 Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A TQFP package contains the item.It is programmed with 36 I/Os.Terminations of devices are set to [0].This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.The part is included in Programmable Logic Devices.44pins are programmed on the chip.When using this device, YESis also available.As a building block for digital circuits, there are 1250gates.Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Initially, it requires a voltage of 3Vas the minimum supply voltage.It runs on a voltage of 5Vvolts.A total of 36 Programmable I/Os are available.This frequency can be achieved at 200MHz.There should be a temperature above 0°Cat the time of operation.A temperature below 70°Cshould be used as the operating temperature.It consists of 4 logic blocks (LABs).It is recommended that the maximal frequency be lower than 175.4MHz.A programmable logic type can be categorized as EE PLD.
EPM7064STC44-6 Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-6 Applications
There are a lot of Altera EPM7064STC44-6 CPLDs applications.
- Multiple Clock Source Selection
- Bootloaders for FPGAs
- Page register
- Dedicated input registers
- LED Lighting systems
- I/O PORTS (MCU MODULE)
- Digital multiplexers
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Wide Vin Industrial low power SMPS
