EPM7064STC44-6N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7064STC44-6N Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).TQFPis the package in which it resides.There are 36 I/Os programmed in it.It is programmed that device terminations will be 44 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is provided by a supply voltage of 5V volts.The part is included in Programmable Logic Devices.There are 44pins on the chip.When using this device, YEScan also be found.A digital circuit is built using 1250gates.For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].This device is mounted by Surface Mount.The pins are [0].A maximum supply voltage of 5.25Vis used in its operation.A minimum supply voltage of 4.75V is required for it to operate.The system runs on a power supply of 5V watts.There are a total of 36 Programmable I/Os.A frequency of 200MHzcan be achieved.It is recommended that the operating temperature be higher than 0°C.Temperatures should not exceed 70°C.4logic blocks (LABs) make up this circuit.If the maximal frequency is less than [0], it should be lower than that.A programmable logic type can be categorized as EE PLD.
EPM7064STC44-6N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-6N Applications
There are a lot of Altera EPM7064STC44-6N CPLDs applications.
- Digital multiplexers
- High speed graphics processing
- USB Bus
- POWER-SAVING MODES
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
- Bootloaders for FPGAs
- Multiple Clock Source Selection
- Field programmable gate
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
