EPM7064STC44-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064STC44-7N Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the TQFP package.As you can see, this device has 36 I/O ports programmed into it.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.This part is in the family [0].In this chip, the 44pins are programmed.This device can also display [0].1250gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.There are 44pins on it.There is a maximum supply voltage of 5.25Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.It operates from 5V power supplies.There are 36 Programmable I/Os.This can be achieved at a frequency of 166.7MHz.Operating temperatures should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.The system consists of 4 logic blocks (LABs).Maximum frequency should be less than 175.4MHz.A programmable logic type is categorized as EE PLD.
EPM7064STC44-7N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-7N Applications
There are a lot of Altera EPM7064STC44-7N CPLDs applications.
- POWER-SAVING MODES
- Discrete logic functions
- Programmable power management
- Power Meter SMPS
- Boolean function generators
- Timing control
- Protection relays
- Custom state machines
- Dedicated input registers
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
