EPM7064STI44-7N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 175.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| Height | 950μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064STI44-7N Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.This device has 36 I/O ports programmed into it.There is a 44terminations set on devices.This electrical component has a terminal position of 0.The power source is powered by 5Vvolts.This part is in the family [0].It is equipped with 44 pin count.In digital circuits, 1250gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.It is designed with 44 pins.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 4.5Vis required.There is 5V power supply available for it.In total, there are 36programmable I/Os.The frequency that can be achieved is 175.4MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 85°C when operating.Its basic building block is composed of 4 logic blocks (LABs).It is recommended that the maximum frequency be less than 175.4MHz.A programmable logic type can be categorized as EE PLD.
EPM7064STI44-7N Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STI44-7N Applications
There are a lot of Altera EPM7064STI44-7N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- State machine control
- Power automation
- D/T registers and latches
- DDC INTERFACE
- Preset swapping
- Programmable power management
- Digital systems
- Voltage level translation
- Discrete logic functions
