EPM7064TC44-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064TC44-15 Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with TQFP.It is programmed with 36 I/Os.It is programmed that device terminations will be 44 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.It has 44pins programmed.In digital circuits, 1250gates serve as building blocks.High efficiency requires a voltage supply of [0].In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.The device has a pinout of [0].It operates at a maximum supply voltage of 5.25V volts.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A total of 36Programmable I/Os are present.This frequency is 100MHz.The operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.4logic blocks (LABs) make up this circuit.The maximum frequency should not exceed 151.5MHz.A programmable logic type is categorized as EE PLD.
EPM7064TC44-15 Features
TQFP package
36 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM7064TC44-15 Applications
There are a lot of Altera EPM7064TC44-15 CPLDs applications.
- D/T registers and latches
- Field programmable gate
- STANDARD SERIAL INTERFACE UART
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Voltage level translation
- Custom shift registers
- Multiple Clock Source Selection
- Complex programmable logic devices
- State machine design
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
