EPM7064TC44-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064TC44-7 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with TQFP.As you can see, this device has 36 I/O ports programmed into it.It is programmed that device terminations will be 44 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It is included in Programmable Logic Devices.Chips are programmed with 44 pins.A digital circuit is built using 1250gates.The supply voltage should be maintained at 5V for high efficiency.In order to store data, EEPROMis used.It is mounted by Surface Mount.The 44pins are designed into the board.A maximum supply voltage of 5.25Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vis required to operate it.There are 36 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 166.7MHz frequency achieved.There should be a temperature above 0°Cat the time of operation.Temperatures should not exceed 70°C.There are 4 logic blocks (LABs) in its basic building block.Maximum frequency should be less than 151.5MHz.Programmable logic types can be divided into EE PLD.
EPM7064TC44-7 Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064TC44-7 Applications
There are a lot of Altera EPM7064TC44-7 CPLDs applications.
- Reset swapping
- Programmable power management
- LED Lighting systems
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Protection relays
- Synchronous or asynchronous mode
- Timing control
- ROM patching
- I/O expansion
- ON-CHIP OSCILLATOR CIRCUIT
