EPM7096LC68-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 52 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1800 |
| Number of Programmable I/O | 52 |
| Number of Logic Blocks (LABs) | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7096LC68-10 Overview
96 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.PLCCis the package in which it resides.In this case, there are 52 I/Os programmed.68terminations have been programmed into the device.Its terminal position is QUAD.Power is supplied by a voltage of 5V volts.It is a part of the family [0].There are 68 pins on the chip.The device can also be used to find [0].1800gates are devices that serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].Surface Mountis the mounting point of this electronic part.It is designed with 68 pins.It operates at a maximum supply voltage of 5.25V volts.The device is designed to operate with a minimal supply voltage of 4.75VV.There are 52 programmable I/Os in this system.There can be 125MHz frequency achieved.The operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.There are 6logic blocks (LABs) that make up its basic building block.It is recommended that the maximum frequency is less than 0.In programmable logic, a type of logic can be categorized as EE PLD.
EPM7096LC68-10 Features
PLCC package
52 I/Os
68 pin count
68 pins
6 logic blocks (LABs)
EPM7096LC68-10 Applications
There are a lot of Altera EPM7096LC68-10 CPLDs applications.
- INTERRUPT SYSTEM
- State machine design
- I2C BUS INTERFACE
- Portable digital devices
- Wide Vin Industrial low power SMPS
- Power up sequencing
- Random logic replacement
- TIMERS/COUNTERS
- Digital systems
- Synchronous or asynchronous mode
