EPM7096LC84-12
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1800 |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
EPM7096LC84-12 Overview
In the mobile phone network, there are 96macro cells, which are cells with high-power antennas and towers.You can find it in package [0].As you can see, this device has 68 I/O ports programmed into it.The device is programmed with 84 terminations.Its terminal position is QUAD.Power is provided by a supply voltage of 5V volts.It belongs to the family [0].In this chip, the 84pins are programmed.Additionally, this device is capable of displaying [0].The 1800gates serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.A total of 84pins are provided on this board.With a maximum supply voltage of [0], it operates.It is powered by 4.75Vas its minimum supply voltage.A total of 64 Programmable I/Os are available.There is 125MHz frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.Its basic building block is composed of 6 logic blocks (LABs).It should be below 125MHzat the maximal frequency.Programmable logic types are divided into EE PLD.
EPM7096LC84-12 Features
PLCC package
68 I/Os
84 pin count
84 pins
6 logic blocks (LABs)
EPM7096LC84-12 Applications
There are a lot of Altera EPM7096LC84-12 CPLDs applications.
- Portable digital devices
- Synchronous or asynchronous mode
- POWER-SAVING MODES
- LED Lighting systems
- Timing control
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ToR/Aggregation/Core Switch and Router
- I/O PORTS (MCU MODULE)
- Cross-Matrix Switch
- Power Meter SMPS
