EPM7096QC100-15
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | EE PLD |
| Number of I/O | 76 |
| Clock Frequency | 100MHz |
| Propagation Delay | 15 ns |
| Number of Gates | 1800 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 6 |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7096QC100-15 Overview
96 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the 100-BQFP package.As a result, it has 76 I/O ports programmed.It is programmed that device terminations will be 100 .This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.It is recommended that the chip be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the MAX? 7000 series.There are 100 pins on the chip.It is also possible to find CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vwhen using this device.There are 1800 gates, which are devices that acts as a building block for digital circuits. There are a total of 6 logic elements or blocks.5.25Vrepresents the maximal supply voltage (Vsup).It should be possible for Vsup to exceed 4.75Vat the supply voltage.It is recommended that the clock frequency not exceed 100MHz.
EPM7096QC100-15 Features
100-BQFP package
76 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
EPM7096QC100-15 Applications
There are a lot of Rochester Electronics, LLC EPM7096QC100-15 CPLDs applications.
- DMA control
- Synchronous or asynchronous mode
- Page register
- State machine design
- Pattern recognition
- Field programmable gate
- I/O expansion
- I2C BUS INTERFACE
- STANDARD SERIAL INTERFACE UART
- Address decoders
