EPM7128AEFI100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PBGA-B100 |
| Number of Outputs | 84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 129.9MHz |
| Propagation Delay | 7.5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 84 |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128AEFI100-7 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 100-LBGA package.As you can see, this device has 84 I/O ports programmed into it.Devices are programmed with terminations of [0].There is a BOTTOMterminal position on the electrical part in question.An electrical supply voltage of 3.3V is used to power it.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.The MAX? 7000Aseries FPGA is one of these types.The EPM7128shows its related parts.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.This logic element/block contains 8logic elements.A power supply of 2.5/3.33.3Vvolts is required to operate this device.There is a maximum supply voltage (Vsup) of 3.6V.Ensure that the supply voltage (Vsup) exceeds 3V.A frequency of 129.9MHzshould not be exceeded by its clock.This device is configured to output [0].There are 84 inputs available for this device.
EPM7128AEFI100-7 Features
100-LBGA package
84 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
84 outputs
EPM7128AEFI100-7 Applications
There are a lot of Intel EPM7128AEFI100-7 CPLDs applications.
- Portable digital devices
- DMA control
- Configurable Addressing of I/O Boards
- State machine design
- Protection relays
- Software-driven hardware configuration
- STANDARD SERIAL INTERFACE UART
- Interface bridging
- Cross-Matrix Switch
- ON-CHIP OSCILLATOR CIRCUIT
