EPM7128AELC84-5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 84 |
| ECCN Code | 3A991 |
| Terminal Finish | TIN LEAD |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 192.3MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Length | 29.3116mm |
| Width | 29.3116mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128AELC84-5 Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 84-LCC (J-Lead) package.There are 68 I/Os on the board.Devices are programmed with terminations of [0].Its terminal position is QUAD.The power source is powered by 3.3Vvolts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.It belongs to the MAX? 7000Aseries of FPGAs.This device also displays [0].The EPM7128indicates that related parts can be found.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.A logic element or block has 8elements.There is 2.5/3.33.3V power supply available for it.In this case, the maximum supply voltage (Vsup) reaches 3.6V.In order to operate properly, the supply voltage (Vsup) should be greater than 3V.It is recommended that the clock frequency not exceed 192.3MHz.
EPM7128AELC84-5 Features
84-LCC (J-Lead) package
68 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7128AELC84-5 Applications
There are a lot of Intel EPM7128AELC84-5 CPLDs applications.
- State machine design
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- Power Meter SMPS
- Address decoders
- Software Configuration of Add-In Boards
- Multiple DIP Switch Replacement
- Bootloaders for FPGAs
- White goods (Washing, Cold, Aircon ,...)
- Complex programmable logic devices
