EPM7128AETC100-10N
| Parameters | |
|---|---|
| Number of Inputs | 84 |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 98MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
EPM7128AETC100-10N Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).A TQFP package contains the item.It is equipped with 84I/O ports.The device is programmed with 100 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is supplied by a voltage of 3.3V volts.It is a part of the family [0].The chip is programmed with 100 pins.Additionally, this device is capable of displaying [0].In digital circuits, 2500gates serve as building blocks.High efficiency requires a voltage supply of [0].Data storage is performed using [0].It is mounted by Surface Mount.The device has a pinout of [0].A maximum supply voltage of 3.6Vis used in its operation.With a minimal supply voltage of [0], it operates.There can be 98MHz frequency achieved.There should be a temperature above 0°Cat the time of operation.A temperature below 70°Cshould be used as the operating temperature.There are 8logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be less than 0.It is possible to classify programmable logic as EE PLD.The inputs employed are 84.
EPM7128AETC100-10N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128AETC100-10N Applications
There are a lot of Altera EPM7128AETC100-10N CPLDs applications.
- Software Configuration of Add-In Boards
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Cross-Matrix Switch
- Software-driven hardware configuration
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- POWER-SAVING MODES
- Auxiliary Power Supply Isolated and Non-isolated
- TIMERS/COUNTERS
- Battery operated portable devices
- Programmable power management
