EPM7128AETC100-5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128AETC100-5N Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a TQFP package.There are 84 I/Os on the board.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.It is included in Programmable Logic Devices.In this chip, the 100pins are programmed.If you use this device, you will also find [0].The 2500gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.The pins are [0].It operates at a maximum supply voltage of 3.6V volts.Normally, it operates with a voltage of 3VV as its minimum supply voltage.In total, there are 84programmable I/Os.There is 250MHz frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.A temperature lower than 70°Cis recommended for operation.The logic block consists of 8 l logic blocks (LABs).It is recommended that the maximal frequency be less than 0.There are several types of programmable logic that can be categorized as EE PLD.
EPM7128AETC100-5N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128AETC100-5N Applications
There are a lot of Altera EPM7128AETC100-5N CPLDs applications.
- DMA control
- Auxiliary Power Supply Isolated and Non-isolated
- PULSE WIDTH MODULATION (PWM)
- Software-driven hardware configuration
- Field programmable gate
- PLC analog input modules
- State machine design
- STANDARD SERIAL INTERFACE UART
- Address decoders
- Digital multiplexers
