EPM7128AETC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | S-PQFP-G100 |
| Number of Outputs | 84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 84 |
| Clock Frequency | 129.9MHz |
| Propagation Delay | 7.5 ns |
| Architecture | PLA-TYPE |
| Number of Inputs | 84 |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128AETC100-7 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 100-TQFP package.As you can see, this device has 84 I/O ports programmed into it.It is programmed that device terminations will be 100 .This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 3.3V.It is a part of the family [0].Trayis the packaging method.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.This type of FPGA is a part of the MAX? 7000A series.The EPM7128indicates that its related parts can be found.A digital circuit is built using 2500gates.In total, there are 8 logic elements/blocks.It runs on 2.5/3.33.3Vvolts of power.3.6Vis the maximum supply voltage (Vsup).It is recommended that the supply voltage (Vsup) be greater than 3V.Ideally, its clock frequency should not exceed 129.9MHz.There is an output of 84configured on the device.There are 84 inputs on the device.
EPM7128AETC100-7 Features
100-TQFP package
84 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
84 outputs
EPM7128AETC100-7 Applications
There are a lot of Intel EPM7128AETC100-7 CPLDs applications.
- Configurable Addressing of I/O Boards
- Pattern recognition
- USB Bus
- Digital systems
- DDC INTERFACE
- White goods (Washing, Cold, Aircon ,...)
- Auxiliary Power Supply Isolated and Non-isolated
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- TIMERS/COUNTERS
- LED Lighting systems
